The biggest casters we’ve ever sold! These dual-wheeled monsters made by Hamilton Caster will move parts that weigh up to 60,000 pounds. With a wheel diameter of 22 inches each caster is rated for 28.000 pound load and they have have an overall height of over 27 inches.
Casters in Alabama…25 Years and Counting!
July of 2022 marks our 25th year in business. Time flies when your having fun! “Thank You” to all our customers over the years. We couldn’t have done it without you. We appreciate each and everyone of you!
Casters in Alabama…Celebrating 20 Years!
Twenty years and still going strong! The Caster Store is proud to be celebrating its twentieth year in business. We opened our doors in July of 1997 on Oxmoor Road in Birmingham. We have been at our current location in Alabaster since 2005. Since the beginning we have maintained a large inventory of casters and wheels to service our customers.
Speaking of customers we’d like to take this opportunity to shout out a big “Thank You” for all the business over the years. We wouldn’t be here without you! We service a large customer base in the State of Alabama and the Southeast United States. Not to mention we have shipped casters as far a New York and California! We appreciate each and every one of you.
How to Select the Proper Caster and Wheel
There is no simple formula or rule that can be followed in selecting the proper casters. Many varying and individual factors must be balanced to make the selection that will do the best job for you. The following are several of the more important considerations.
Load Weight. The heavier the load, the larger the wheel required for the caster. The weight of the load also influences the mobility of the wheel. Roller or ball bearings are recommended for loads over 400 pounds. Weight capacities are shown for each caster in this catalog.
Floor Conditions. Make sure the wheel you select is large enough to pass over cracks in the floor, tracks, moldings and other obstructions. For floor protection on linoleum, tile, carpet, etc., use polyurethane or Performa rubber wheels.
Unusual Conditions. Each wheel material has certain characteristics which will give the best results where unusual conditions exist. For example, where acids, oils, chemicals and other conditions harmful to rubber are present, Colson polyurethane, polyolefin, Maxim, phenolic or steel wheels are recommended. Check conditions, then select caster and wheel.
Rolling Ease. The larger the wheel diameter, the easier it rolls. Roller bearings carry heavier loads. Ball bearings roll easier but carry lesser loads. When possible, use the largest ball bearing wheel for best results.
Extreme Climates. Room temperatures are no problem for most casters. But extreme cold or heat can be a problem. Colson helps solve this problem with “Colson 45”… the green lube which assures caster rolling ease from 45°F below zero to 260°F above. It’s standard on all Colson casters. (Note: Some wheel types should not be used in extreme temperature ranges.